Jin Huajin artisan paint co., LTD. In order to quality as a strategy to extend, looking to the future, we will with the spirit of pioneering spirit, combined with the professional development with the feedback of the market, continuously improve the management idea, wholeheartedly with the domestic and foreign merchants win-win cooperation, common development, create brilliant!

During the actual construction, because the construction surface shape, the requirements of the film thickness, construction methods and technical workers, construction conditions, weather and so on various factors, the actual usage of paint must be greater than in the construction area is divided by the theory of spreading rate calculated theory of \"usage\". After spraying treatment on the surface of paint, steel plate wave in the film thickness of less than the film thickness of the wave trough, to meet the requirements of peaks in the corrosion thickness (avoid pitting), trough the potholes of the paint is equivalent to \"hide\" in the loss, this is known as \"roughness of steel consumption loss\". In the table below shows the different paint loss caused by the injection way (expressed as a dry film thickness) : after construction coating film thickness reach or exceed the prescribed when acceptance of membrane, technical services, supervision or owner will be according to the normal qualified signature, but do not meet the provisions of part film thickness will be required to fill, therefore will have \"super thick\" wear and tear. Results in uneven distribution of film thickness of the concrete factors mainly include: proficiency in workers, construction environment, construction of artifacts (plane) simple or complex, the construction method, airless spray, air spray, brush, roller coating)