Brush emulsioni paint is not difficult, but the first decoration or those who are on their own, some problems should pay attention to.

Interior wall paint color

On the color board, even on the bucket, can see color may be with different on besmear brushs metope to the whole. In order to avoid undesirable, can take the following steps: don't make a choice of colour in paint shop final decision; On the contrary, should put the color board or the actual coating samples home, in to observe the color of the paint besmear brushs metope place;

Low were observed in the natural light and night light the color of the paint, because even the same kind of coating of the same kind of color, under the condition of different illumination, show color will be different.

Also remember, with a kind of color paint besmear to brush the area with larger area, its color tends to increase. In order to make up for this, had better use than to light the color of the paint.

Coating has a variety of glossiness, both the "highlights", there is also a "flat". High gloss coating reflective sexual better, so the coating will make the room look brighter. But on the other hand, high gloss coating is easy to highlight the drawbacks of metope, so if metope is not very smooth, appropriate chooses matt coating.

Interior wall paint coating tools

Good quality tools can brush a thicker coating, better able to cover the bottom the original color, can make the film more durable, can stand the swab repeatedly.

With coatings and the right tools, before beginning to brush metope, should first with ordinary cleaner or water get rid of metope of dust, dirt, etc, and I will dry. If you have any nail holes in the wall with the filler to fill it up.

Interior wall paint processing of the original wall

Original putty layer or quality is not good at the grass-roots level to root out, and saving; Lime-sand metope as a loose a shall all be eradicated, if old metope is fair, don't move, because blow be bored with child of the technical requirements is quite high. General can do local fill putty finishing.

The specific process: cleaning the grassroots, fill the putty, local blow be bored with child, smooth. Basic level processing is the most key link to ensure the quality of construction, which ensure the wall completely dry is also the most basic conditions. Basic level processing usually best placed more than 10 days. Metope 牞 must be cleaned at least should be full of scraping putty twice 牞 to meet standard requirements.

Interior wall paint brush paint

The construction method of besmear brushs emulsioni paint can use hand brush, roller coating and spraying. Coating should be continuous operation quickly, a brush. Brush besmear brushs emulsioni paint should be uniform, there can be no leakage, flow phenomenon such as attached. Besmear again, grinding it again. General should be more than two times.